Lineup

The Wave Racer Keel Twin is our modern interpretation of the classic fish, combining timeless twin-fin flow with refined performance design. Built to maximise speed and enjoyment in everyday surf, it features a balanced rocker, modern outline and carefully tuned bottom contours that generate effortless acceleration while maintaining a lively, responsive feel.

A slight rolled entry flows into a subtle single concave through the centre of the board before transitioning into a double concave set within a shallow V through the tail. This bottom configuration creates natural lift and down-the-line speed while allowing smooth rail-to-rail transitions and controlled release through turns. The fuller forward outline improves paddle power and early wave entry, while the semi-deep swallow tail and keel fin setup provide exceptional drive, projection and hold without sacrificing the loose, skatey feeling that makes twin fins so much fun.

Whether you're trimming across playful beach breaks, drawing long carving lines on point waves, or making the most of small, gutless surf, the Wave Racer delivers effortless speed, flow and style.

Available from 4'10" to 6'2", the Wave Racer is designed for surfers who want classic twin-fin freedom with the refinement and performance of a modern design.

The 3-Fish was developed in response to demand from my progressive East Coast USA collaborators who wanted the speed and paddle power of a fish, but with the familiar feel and predictability of a thruster. The result is a true high-performance fish that bridges the gap between traditional fish designs and modern shortboards.

Featuring a fuller, rounded nose, a wide point positioned slightly forward of centre, and a refined semi-pulled swallow tail, the 3-Fish carries volume where it's needed for effortless paddle power while maintaining a performance-oriented tail for precise control. A low entry rocker with a subtle increase in tail rocker creates excellent glide and speed while allowing the board to fit comfortably into tighter arcs and more critical sections. A high-performance single concave transitioning into a double concave through the fin cluster generates lift, acceleration and exceptional drive while maintaining a lively, responsive feel under the back foot.

Designed around a three-fin configuration, the 3-Fish can be ridden as either a 2 + 1 for a smooth, flowing feel with added release, or as a thruster when maximum drive, control and vertical performance are required. This versatility allows surfers to fine-tune the board to suit both the conditions and their own surfing style.

Designed to perform in everything from knee-high summer surf to powerful overhead waves, the 3-Fish offers the speed of a fish with the confidence and versatility of a performance shortboard. Whether you're linking smooth carving turns or attacking more critical sections, it delivers predictable performance across an exceptionally wide range of conditions.

I've ridden my own 3-Fish throughout the South Shore of Oahu with incredible results, and if I could only own one board, this would probably be it. It's also a proven performer on the US East Coast, where South Carolina standout Georgia Brown won multiple East Coast titles on her custom 3-Fish built in our lightweight CEPX construction.

Available with a swallow tail from 5'4" to 6'2", the 3-Fish is the perfect choice for surfers wanting one board that delivers speed, versatility and high-performance surfing across almost any conditions.

The Killa Quad was developed over two years with one goal in mind—to create the ultimate high-performance quad for generating maximum speed in small, everyday surf and modern wave pools. While many quad designs excel in a straight line, the Killa Quad was engineered to retain the responsiveness and rail-to-rail feel of a performance shortboard while unlocking the speed and projection that only a dedicated quad can deliver.

A wider performance outline provides increased flotation while creating a smoother, more forgiving outline curve. This allows the Killa Quad to generate speed with minimal effort, paddle exceptionally well, and maintain fluid rail-to-rail transitions. The added surface area also makes it an excellent choice for larger surfers looking for high-performance responsiveness without sacrificing paddle power or wave-catching ability.

The low rocker generates exceptional speed with very little effort, while a subtle touch of nose flip keeps the board forgiving in steeper sections and helps prevent nose catches.

Paired with the swallow tail and dedicated quad fin setup, the Killa Quad delivers explosive acceleration, projection and control in everything from weak beach breaks to modern wave pools.

Designed exclusively as a quad, every aspect of the board—from the outline and rocker to the fin placement—has been purpose-built around a four-fin configuration to maximise speed, projection and flow without sacrificing manoeuvrability. It isn't a thruster with extra fin boxes; it's a true performance quad designed to fly.

Available from 5'4" to 6'4" in both poly and our lightweight CEPX construction, the Killa Quad delivers outstanding performance in everyday ocean surf. For wave pools, however, I highly recommend CEPX, where its lightweight feel, lively flex, and increased durability allow the design to perform at its absolute best.

The Limo was designed for surfers who want maximum wave-catching ability without sacrificing performance. Combining generous volume, a low rocker, and refined performance features, the Limo delivers effortless paddling, early wave entry, and surprising responsiveness, making it one of the most versatile boards in the Sollife range.

A fuller outline and increased volume provide exceptional flotation and stability, allowing the board to glide into waves with ease while maintaining speed through flatter sections. The low rocker maximises paddle efficiency and down-the-line speed, while a single concave flowing into a vee double concave through the tail generates lift, drive, and smooth rail-to-rail transitions. Finished with a wide block squash tail, the Limo delivers outstanding stability while still feeling lively and responsive under your feet.

The Limo is the only board in the Sollife range available with a five-fin setup. The increased tail area created by the wide block squash allows the board to perform exceptionally well as either a thruster or a quad, giving surfers the freedom to tune the board for maximum drive and control or added speed and release, depending on the conditions.

Ideal for surfers looking to maximise wave count without giving away the ability to turn, the Limo is equally suited to progressing surfers wanting extra confidence and experienced riders looking for a highly enjoyable everyday board.

Available from 5’4” to 6’6” in both poly and our lightweight CEPX construction, the Limo offers outstanding versatility across a wide range of conditions. CEPX is also an excellent choice for wave pools, where its lightweight feel, lively flex, and increased durability complement the repetitive demands of artificial waves.

Available: 6’4”–6’10” | Twin Fin

The Big Fish is designed for surfers who want all the speed, flow, and effortless paddle power of a fish, but in a larger-volume package.

Built exclusively between 6’4” and 6’10”, it features a low overall rocker for effortless paddling, instant speed, and endless flow. Whether you’re a bigger surfer or simply looking for extra volume, the Big Fish remains lively, responsive, and incredibly fun to ride.

A carefully foiled outline, refined rails, and the classic twin-fin setup deliver effortless acceleration, smooth rail-to-rail transitions, and that unmistakable twin-fin glide.

From soft beach breaks to long point waves, the Big Fish turns average sessions into memorable ones.

Best suited for: Intermediate to advanced surfers.

Recommended fin setup: Twin Fin.

The 4CHTP (4 Channel Twin Pin) is all about speed, flow, and maneuverability—on tap and ready for action. With a full plan shape, smooth, mild bottom curves, and four medium-depth channels beginning just ahead of the fins and running through the round pin tail, the 4CHTP generates plenty of squirt, drive, and hold through the tail without sacrificing its fast, free-flowing feel.

Whether you’re cruising in 2-foot waves or charging clean 6-foot surf, the 4CHTP delivers fun and performance for surfers of all skill levels.

A favorite at Santa Cruz point breaks, the 4CHTP has also been thoroughly tested on the fast, hollow reefs of Indonesia. Its blend of speed, flow, drive, and hold has made it a go-to design for surfers chasing quality waves around the world.

Available in lengths from 5’8” to 6’10” in poly construction only, with a round pin tail and single-tab twin-fin box setup.

If you’re looking for one of the fastest twin-fin designs you’ll ever ride, the 4CHTP won’t disappoint.

The Shred Grom is a true high-performance shortboard designed specifically for young surfers who are serious about taking their surfing to the next level. Refined over more than 30 years of shaping for competitive juniors, this proven design has helped young surfers win numerous club, state, and national titles.

Every Shred Grom is custom-built to suit the individual surfer’s age, size, ability, and local waves, ensuring the perfect combination of paddle power, speed, control, and progression.

Available with a round, squash, or swallow tail, balanced rocker, and refined performance rails, every Shred Grom is tuned to suit the individual surfer’s needs and development.

As your surfer grows, so does their equipment. We’ll continue refining each board to match their progression, helping build confidence and performance every step of the way.

Available exclusively as a custom order in poly construction only, with round, squash, or swallow tail options and a three-fin thruster setup. A wide range of dimensions is available to suit every stage of a young surfer’s development.

When tomorrow’s champions need a board to match their potential, the Shred Grom delivers.

The HP26 Series is the pinnacle of high-performance surfboard design at Sollife. Refined over more than 30 years of shaping for some of the world’s best surfers, these proven designs have evolved through thousands of custom boards and real-world testing in some of the world’s best waves.

Designed for maximum speed, drive, responsiveness, and control, the HP26 Series delivers uncompromising performance in everything from everyday beach breaks to world-class point and reef waves. Every curve, rail, rocker, and bottom contour has been carefully refined to create a board that feels fast, alive, and predictable under your feet.

Available in three distinct tail configurations, each offering its own performance characteristics:

• HP26RND: Maximum hold, control, and confidence in powerful waves.

• HP26SQ: The ultimate all-around performance option, offering speed, release, and versatility across the widest range of conditions.

• HP26SW: Added lift, speed, and release for surfers looking to generate extra drive and acceleration.

Every HP26 is custom-built to suit the individual surfer’s height, weight, ability, and local waves, ensuring each board performs exactly as intended.

Available in HP26RND, HP26SQ, and HP26SW from 5’8” to 6’3”, exclusively in poly construction with a three-fin thruster setup.

Performance Rocker Options

The HP26, Vitality, and Indo are available with two proven performance rocker options, allowing you to fine-tune your custom board to suit your local waves and surfing style.

Snake Rock (SR)

A continuous high-performance rocker featuring a deep single-to-double concave. Originally redeveloped with longtime team rider Jake “The Snake” Morrison, the SR delivers exceptional freedom, speed, and control in steep beach breaks, hollow points, and powerful reef waves.

California Rock (CR)

A proven California-inspired rocker featuring a lower entry, flatter center, and accelerated tail kick. Designed to generate effortless speed through flatter sections while maintaining an explosive response in the pocket, it is ideal for everyday beach breaks, point breaks, and weaker waves.

If you’re looking for uncompromising high performance, the HP26 Series represents the very best of more than 30 years of Sollife design evolution.

The VW (Vitality Wide) takes everything surfers love about our proven Vitality and adds extra width and volume for effortless paddling, earlier wave entry, and increased forgiveness—without sacrificing true high-performance surfing.

Sharing the same proven California Rock (CR), bottom contours, and rail design as the Vitality, the VW delivers outstanding speed, drive, and responsiveness in everyday conditions. Whether you’re looking for a little extra volume, stepping down from a shortboard, or simply wanting to catch more waves without giving up performance, the VW offers the perfect balance of paddle power and manoeuvrability.

Every VW is custom-built to suit the individual surfer’s height, weight, ability, and local waves, ensuring the ideal combination of performance and user-friendly versatility.

Available from 5’10” to 6’6” in poly or CEPX construction, with moon or swallow tail options and a three-fin thruster setup.

If you’re looking to catch more waves without giving up true high-performance surfing, the VW delivers the best of both worlds.

The Mid is the latest evolution of our refined mid-length series, designed to deliver effortless wave-catching, smooth trim, and surprisingly high-performance surfing. Blending classic glide with modern responsiveness, it is equally at home in everyday beach breaks, long point waves, and clean reef setups.

Featuring a low entry rocker, subtle dome vee through the nose, and a flowing panel vee throughout the board, the Mid paddles effortlessly while transitioning smoothly from rail to rail. The result is exceptional speed, stability, and a lively feel that encourages flowing turns without sacrificing control.

Whether you’re looking for an easy paddler, a reliable travel board, or simply a board that makes average waves feel fun again, the Mid delivers outstanding versatility across a wide range of conditions.

Available from 6’8” to 7’2” in poly construction only, with a 10” single-fin box and Futures side-fin boxes, allowing it to be ridden as either a single fin or a 2+1.

If you’re looking for one board that does almost everything, the Mid won’t disappoint.

The BS86 (Big Sexy 8’6”) is our modern high-performance longboard, developed in collaboration with young Hawaiian charger Nainoa. Designed for surfers who want the paddle power and glide of a longboard without sacrificing speed, responsiveness, and tight-turning performance, the BS86 feels equally at home in everyday surf or quality waves.

Featuring refined, low-performance rails, generous tail rocker, and a rounded pintail, the BS86 excels in steeper waves where traditional longboards can begin to feel cumbersome. Despite its performance focus, it paddles effortlessly, catches waves with ease, and encourages confident, committed surfing.

Whether you’re carving powerful arcs, attacking the pocket, or simply enjoying the glide that only a longer board can offer, the BS86 delivers modern longboard performance with a lively, responsive feel.

Available from 8’0” to 9’2” in poly construction only, with a rounded pintail, quad-fin setup, and a 10” single-fin box, allowing it to be ridden as either a quad or a 2+1.

If you’re looking for a longboard that surfs more like a performance shortboard, the BS86 won’t disappoint.

The “6” is one of the most unique and highest-performing designs in the Sollife lineup. Refined over more than 30 years of shaping, this model proves that true speed doesn’t always come from lighter boards—it comes from better design.

Featuring six deep channels running through the tail, the “6” is built to generate incredible speed, drive, projection, and hold when the waves become serious. From powerful beach breaks to lined-up points and hollow reef passes, this board comes alive when pushed hard, rewarding committed surfers with exceptional control and acceleration through every turn.

Unlike many modern surfboards designed for ease of production, the “6” demands countless extra hours in the shaping bay. Every channel is individually shaped, glassed, and sanded by hand, making it one of the most labour-intensive boards in the range. The result is a board that delivers uncompromising performance where it matters most.

Available from 5’10” to 6’6” in poly construction only, with a choice of round or swallow tail and a three-fin thruster setup.

To achieve the precise fin placement and cant angles around which this design was developed, the “6” is available exclusively with the FCS I two-plug fin system. A lightweight custom fin set is supplied and specifically selected to complement the board’s performance.

If you’re chasing maximum speed, drive, and hold in quality waves, the “6” delivers performance without compromise.

The Vitality is designed for surfers looking to maximise wave count without sacrificing true high-performance surfing. Featuring additional foam through the chest area, a wide point positioned just forward of centre, and a slightly wider outline than the HP26 throughout, the Vitality delivers effortless paddling, earlier wave entry, and outstanding speed, drive, and responsiveness across an incredibly wide range of conditions.

Refined over decades of shaping and tested everywhere from everyday beach breaks to powerful point waves and the hollow reefs of Indonesia, the Vitality has become one of the most versatile and dependable models in the Sollife lineup. Whether you’re surfing a little less than you’d like, looking for a touch more paddle power, or simply wanting one board that performs in almost any conditions, the Vitality delivers confidence without compromise.

Featuring a finely foiled tail, balanced performance rails, and a choice of moon, swallow, squash, or round tail, every Vitality is custom-built to suit the individual surfer’s height, weight, ability, and local waves. My personal favourite is the moon tail, which offers exceptional bite, hold, and smooth rail-to-rail transitions while maintaining plenty of speed and release.

Available from 5’10” to 6’6” in poly or CEPX construction, with three-fin thruster or five-fin setup options.

Performance Rocker Options

The Vitality is available with two proven performance rocker options, allowing you to fine-tune your custom board to suit your local waves and surfing style.

Snake Rock (SR)

A continuous high-performance rocker featuring a deep single-to-double concave. Originally redeveloped with longtime team rider Jake “The Snake” Morrison, the SR delivers exceptional freedom, speed, and control in steep beach breaks, hollow points, and powerful reef waves.

California Rock (CR)

A proven California-inspired rocker featuring a lower entry, flatter centre, and accelerated tail kick. Designed to generate effortless speed through flatter sections while maintaining an explosive response in the pocket, it is ideal for everyday beach breaks, point breaks, and weaker waves.

If you’re looking for one board that performs across the widest range of conditions, the Vitality is hard to beat.

The Stump 2.0 is the modern evolution of a classic Sollife design, brought back to life after longtime Central California team rider Tony Foster asked me to revisit one of his all-time favourite boards. Updated with additional foam through the chest area, refined rails, and modern bottom contours, the result is a fast, lively, and incredibly fun high-performance small-wave board.

Designed to sit between the HP26 Series and the Vitality, the Stump 2.0 delivers effortless speed, quick acceleration, and a loose, responsive feel in everyday beach breaks and playful point waves. It paddles easily, creates speed with minimal effort, and encourages progressive surfing even when the waves aren’t at their best.

Featuring a rounded squash tail, balanced performance rails, and a choice of Snake Rock (SR) or California Rock (CR), every Stump 2.0 is custom-built to suit the individual surfer’s height, weight, ability, and local waves.

Available from 5’8” to 6’4” in poly construction only, with a three-fin thruster setup.

Performance Rocker Options

The Stump 2.0 is available with two proven performance rocker options, allowing you to fine-tune your custom board to suit your local waves and surfing style.

Snake Rock (SR)

A continuous high-performance rocker featuring a deep single-to-double concave. Originally redeveloped with longtime team rider Jake “The Snake” Morrison, the SR delivers exceptional freedom, speed, and control in steep beach breaks, hollow points, and powerful reef waves.

California Rock (CR)

A proven California-inspired rocker featuring a lower entry, flatter centre, and accelerated tail kick. Designed to generate effortless speed through flatter sections while maintaining an explosive response in the pocket, it is ideal for everyday beach breaks, point breaks, and weaker waves.

If your local waves are waist-high to slightly overhead, the Stump 2.0 will quickly become one of the most-used boards in your quiver.

Originally developed for the powerful waves of Blacks Beach in La Jolla, California, the blaX has evolved into one of the most versatile and trusted step-up designs in the Sollife lineup.

Featuring a forward wide point, slightly fuller nose, sleek performance rails, and an extended, accelerated tail rocker, the blaX delivers effortless paddle power without compromising responsiveness. A low entry rocker combined with a single concave flowing into a double concave through the tail creates exceptional speed, drive, and control while maintaining the smooth, snowboard-like rail-to-rail feel the blaX has become known for.

Despite its step-up pedigree, the generous outline and balanced volume distribution make the blaX remarkably user-friendly across a wide range of conditions. From overhead beach breaks and long point waves to powerful reef passes, the blaX inspires confidence when the surf turns serious.

Available from 6’2” to 7’2” in poly construction only, with a round tail and three-fin thruster setup.

If you’re looking for a step-up that combines paddle power, confidence, and true high-performance surfing, the blaX won’t disappoint.

Designed for serious reef waves and long, powerful point breaks, the Indo Series is built for surfers chasing quality waves in Indonesia, Fiji, and the Maldives.

A refined high-performance rocker combines with a pulled-in outline to deliver exceptional control, speed, and confidence in steep, hollow surf. The bottom contour features a single concave, generating lift, drive, and smooth rail-to-rail transitions while maintaining control at high speed.

Whether you’re threading barrels or drawing long, committed lines on open faces, the Indo Series is designed to perform when the waves demand your best.

Board sizes: 6’2”–6’10”

Recommended wave size: 4–12 ft

Fin setup: Three-fin thruster or quad.